EPS Sandwich Panel/Lightweight Wall Panel/Building Materials Insulation Panels

1.Product Information 1).ZJT EPS Sandwich PanelZJT Light Composite Energy-saving Sandwich Wall Panel is composed of face panel and interior filling. The material of face panel is thin fiber cement board or calcium silicate board,and the middle is filled with lightweight composite core material,including cement,EPS and

Featured Products

1.Product Information

 

1).ZJT EPS Sandwich Panel

ZJT Light Composite Energy-saving Sandwich Wall Panel is composed of face panel and interior filling. The material of face panel is thin fiber cement board or calcium silicate board,and the middle is filled with lightweight composite core material,including cement,EPS and fly ash. The quality and technology of product have reached to a new level and become the leading brand among the similar products.

The product has solid,lightweight,thin,better strength,impact resistance,hanging strength,heat insulation,sound insulation,fireproof,waterproof,easy cutting,pet and rot resistant,increasing usable space. It can be arbitrary slot,without batch file,dry operation,enviroment protection,which achieve energy conservation and energy efficiency. At the same time,this reduces the total area to be occupied by the wall and to raise residential practical area,alleviates the structure load,improves the building aseismatic capacity and safety performance,and reduce total cost. This production technology and application is the reform of our country wall material,is a new breakthrough.

The company relying on advanced equipment,first-class technology,excellent quality,strong,productivity,favorable customer service system,has set up the good brand image in the market,and been widely recognized by the same.

 

2).Product Composition

Surface :fiber cement board/calcium silicate board

Interior filling materials: EPS / cement / fly ash / sand / additive

EPS Sandwich Panel/Lightweight Wall Panel/Building Materials Insulation Panels

 

 

3).Product Size

Length:2270/2440mm

Width:610mm

Thickness:60/75/90/100/120/150mm

 

4).Product Advantages

Heat insulation

Rapid installation and Fast consrtuction

Lightweight

Fire proof 

Water proof, Damp proof

Quake proof 

Sound insulation

Energy saving, Green, Environmental friendly

Strong hanging strength

Excellent surface finish

Unique tongue and groove

Dry working

Durable and recyclable

EPS Sandwich Panel/Lightweight Wall Panel/Building Materials Insulation Panels
 

5).Installation

1. Paying-off and Sandwich Wall Panels Arrived on Site
Adopting high precision laser alignment instrument to eject double lines of panel thickness on axial line of panel installation location, move the panel to the settled location according to different specifications.
2. Sawing Panel According to Requirement
Adopting hand-hold electric saw cutting the panel according to different need, make sure maximum using each panel to reduce the waste.
3. Sizing
Sizing the bump slots and even up the special ZJT panel adhesive into the bump slots and baseline of the floor.
4. Installation
Erected the painted panel with adhesive and move it to the prepared installation site, adjusting the panel to fit both of the baseline and tighten each panel to push the extra polymer mortar out of the joint crack, fixing the panel by wooden wedge.
5. Correction and Fixation
Correcting the panel position by using 2m levelness & verticality straight guide rule, adopting expansion rubber together with 6mm or 8mm steel bar to fix the panel.
6. Grouting and Filling Thick Liquid
Leave the installed and corrected panel for one day, adopting BOYUEJIA special panel adhesive to filling the joint crack. Remove wooden wedge and smooth the crack by polymer mortar.
7. Slotting and Wiring
Adopting hand-electric saw to cut the slotting for switch box or concealed line if needed, smooth the slotting by polymer mortar after installation.
8. Sticking Anti-Crack Tape
Sticking anti-crack tape in 3-5 days after grouting to prevent crack which may caused by long time expansion or contraction.
9. Installing Door Frame
Reserve holes for door and window, and fixing the holes by plywood line anchor.
10. Decoration
Sandwich wall panel do not need extra plaster for the surface, decorating the wall surface directly by tiles, wallpaper or other painting.

 

2.Product Application 

EPS Sandwich Panel/Lightweight Wall Panel/Building Materials Insulation Panels
 

 

3.Packaging and Loading

Standard exporting packing, plywood pallet+corner protective paper+packing belt+plastic thin film
Loading: According to container size and panel specification
Protect your goods for long-distance transport!


EPS Sandwich Panel/Lightweight Wall Panel/Building Materials Insulation Panels

 

4.Contact Information

EPS Sandwich Panel/Lightweight Wall Panel/Building Materials Insulation Panels

 
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours