We use cookies to enhance your experience. By continuing to browse this site you agree to our use of cookies. More info.
The basic physical process of irradiating a material with photons of a known energy and measuring the ejected photoelectrons has remained unchanged over six decades since it was first commercialized. X-ray photoelectron spectroscopy (XPS), also referred to as Electron Spectroscopy for Chemical Analysis (ESCA) is an invaluable tool for materials surface characterization. However, the capability and performance of a modern spectrometer have changed beyond recognition from those earliest instruments.
Figure1: Schematic diagram of commonly used photon sources interacting with the electronic ‘shells’ of aluminum to generate photoelectrons. Credit: Kratos Analytical
The latest generation of spectrometers is fully automated, allowing remote operation. Spectra can be acquired in just a few minutes. Chemical state images are acquired with micron spatial resolution over a few hundred-micron field of view. And recently developed cluster ion sources allow sputter depth profiling through microns of polymer material with retention of chemistry. And these are only some of the attributes that demonstrate the value of XPS for materials characterization.
XPS is a mature and widely used technique for probing the surface chemistry of a material. Instruments are used in both academic and industrial research labs. AXIS Supra user, Dr. Josh Lipton-Duffin from QUT, Brisbane explains ‘from a mechanistic view surfaces are where the action happens – the way in which materials interact is via their surfaces. All fields of chemistry, catalysis, epitaxy, and even biology to an extent are inherently surface-driven. It is important to have tools to study surfaces, because the physics is simply different on a surface than it is in the bulk of a material. Everyone understands surface-to-volume ratio goes up as dimensions shrink, and by extension, the trend towards miniaturization means that surfaces and interfaces are more important than ever before.
It is important to understand the origin of the surface sensitivity of XPS. The X-rays used are relatively ‘soft’ and can only excite photoelectrons whose binding energy within their electronic shells is less than the photon energy ca. 1500 eV. These low-energy photoelectrons cannot travel very far through a material before losing energy or being scattered and not detected. For a conventional lab. based XPS the information depth of the technique is widely accepted as 10 nm. As Dr. Andreas Holländer, Senior Scientist at The Fraunhofer Institute for Applied Polymer Research, states ‘Some important properties of materials such as the wetting behavior, the adhesion of glues, inks, paints, also of bacteria and viruses are determined by the outermost atomic layers of a surface’. This is expanded on by Martin Moos, Product Development Specialist at 3M, Germany who explains ‘The way in which materials interact with each other is through their surfaces and interfaces and hence this sample regime is crucial for their performance in any given environment. Adhesives are a practical example. They can be so strong that they can hold a structural panel for the life of a building or so gentle they can be applied to human skin to secure tubing. Applying an adhesive to an ill-prepared or contaminated surface will lead to compromised adhesion and ultimately bond failure. That is a common example where surface analysis comes into play.’
The ability to probe the lateral distribution of elemental and chemical states across a surface is provided by modern imaging XPS instruments. Determining the inhomogeneity of surface chemistry can be vital in understanding the functionality of a material or product. XPS imaging has been used to characterize corrosion pits, determining the chemical states present allowing a proposed reaction pathway. Dr. Mark Biesinger explains that Kratos XPS instruments at Surface Science Western, University of Western Ontario are ‘heavily involved in research on the copper-coated steel containers that will be used to store nuclear fuel waste in the deep geologic repository for the next million years or so. A lot of the work I’ve done on characterizing copper and other transition metal species by XPS has been driven by this research and other research in the nuclear energy field.’
As highlighted by our Users, the value of XPS in providing quantitative, chemical information from the surface of a material is clear. Whether it’s increased publication output for academic Users or improvements in product quality for industrial Users, XPS instrumentation is an invaluable tool for a materials characterization lab.
Please use one of the following formats to cite this article in your essay, paper or report:
Kratos Analytical, Ltd.. (2022, July 18). The value of X-ray photoelectron spectroscopy for materials characterization. AZoM. Retrieved on July 22, 2022 from https://www.azom.com/article.aspx?ArticleID=21844.
Kratos Analytical, Ltd.. "The value of X-ray photoelectron spectroscopy for materials characterization". AZoM. 22 July 2022. <https://www.azom.com/article.aspx?ArticleID=21844>.
Kratos Analytical, Ltd.. "The value of X-ray photoelectron spectroscopy for materials characterization". AZoM. https://www.azom.com/article.aspx?ArticleID=21844. (accessed July 22, 2022).
Kratos Analytical, Ltd.. 2022. The value of X-ray photoelectron spectroscopy for materials characterization. AZoM, viewed 22 July 2022, https://www.azom.com/article.aspx?ArticleID=21844.
Do you have a question you'd like to ask regarding this article?
At the Advanced Materials Show 2022, AZoM caught up with the CEO of Cambridge Smart Plastics, Andrew Terentjev. In this interview, we discuss the company's novel technologies and how they could revolutionize how we think about plastics.
At the Advanced Materials Show in June 2022, AZoM spoke with Ben Melrose from International Syalons about the advanced materials market, Industry 4.0, and efforts to move toward net-zero.
At the Advanced Materials Show, AZoM spoke with Vig Sherrill from General Graphene about the future of graphene and how their novel production technique will lower costs to open up a whole new world of applications in the future.
Discover the OTT Parsivel², a laser disdrometer that can be used to measure all precipitation types. It allows users to collect data on the size and speed of falling particles.
Environics offers stand alone permeation systems that can be used for single or multiple disposable permeation tubes.
Grabner Instruments’ MiniFlash FPA Vision Autosampler is a 12-position autosampler. It is an automated accessory designed to be used with the MINIFLASH FP Vision Analyzer.
AZoM.com - An AZoNetwork Site
Owned and operated by AZoNetwork, © 2000-2022